► Adjusting the size of Coffee Grounds:
Hold the center of the handle with the main unit firmly and turn the adjustment nut.
Make sure that the handle is attached when turning the grind adjustment nut.
Hold the center of the handle with the main unit firmly.
Rotate to the right (clockwise) for a finer grounds or to the left (counterclockwise) for a coarser grounds.
The grind adjustment knob must be attached in the correct orientation.
Attach the side with the 8 dimples around the center facing the burr side.
► Using the Mill:
1. Grind a small amount of beans to test and adjust the coarseness of the coffee grounds. (Refer to the adjustment method for details.)
2. Use between 10g to 12g of coffee per cup. Put enough beans for 1 or 2 cups of coffee into the hopper. Attach the handle after fasten the hopper cover.
3. Hold the grinder firmly and rotate the handle clockwise to grind the coffee beans.
* Never turn the handle counterclockwise (left), as doing so will damage the burr. (!!!)
► Product Care:
The burr section can be disassembled for washing. Be careful not to lose any parts when disassembling.
Disassembling the Burr:
1. Turn the grind adjustment knob counterclockwise to remove it.
* Make sure that the handle is attached when turning the grind adjustment knob.
2. Remove the inner burr and the inner burr holder.
The outer burr can be removed after removing the outer burr stopper. If the outer burr stopper is difficult to remove, you can use a tool such as a flathead screwdriver to press from the outside, as shown in the diagram.
3. The burr may be coated in coffee oil. Soak the burr in diluted neutral detergent and then thoroughly rinse. Allow it to dry completely after washing.
► Precautions for Use:
• Wash the product before using for the first time.
• Turning the grind adjustment nut too far in the clockwise direction causes the ceramic burrs to grind together, which may result in a malfunction.
• Do not force the handle around if it is difficult to move, as doing so may damage various parts of the product.
• Small coffee bean fragments may get into the hopper ridges or gaps, preventing coffee beans from dropping smoothly resulting in the coffee
handle spinning freely. Gently tap the coffee mill occasionally during use.
• The burrs may become blunt due to prolonged use. Replace the coffee mill when the amount of coffee beans that can be ground reduces significantly.
• Do not use to grind anything other than coffee beans. Doing so may damage the product.
• Do not insert your fingers into the coffee grinder while rotating the handle.
• Do not allow the ceramic parts to be hit by hard material, or allow the product to be dropped. Doing so may cause the burr to chip or crack.
• Do not use hard or pointed objects to strike or scratch the AS resin bottle, as doing so may cause scratches or may cause the coating to peel off.